Lustre Pure Light is the only hands free blue light device that allows customers to treat separate parts of the body at the same time.
No, Lustre Pure Light Technology delivers therapeutic safe natural blue light at a wavelength of 415 nm. This is not in the UV spectrum of the natural light wavelength. In clinical trials of blue light at 415 nm, there have been no reported incidences of UV skin damage.
Charge the device for 6 hours and then try to turn on again. We advise that the Lustre controller is recharged following every treatment session to ensure sufficient power for the next session.
Before using Lustre Pure Light ensure skin is clean and dry and that all make-up is removed.
Wash skin with normal cleanser or with a mild soap and warm water. Ensure skin is dry after cleansing and before using the Lustre Pure Light.
If other topical treatments for acne are being used these should be applied following the Lustre Pure Light treatment session.
The keypad will auto-lock if no keys are pressed for 15 seconds. To unlock the keypad hold the down key (down arrow key on left), then press the select key (middle key with a tick) whilst still holding the down key. Release both keys simultaneously.
Please see this video for a demonstration:
· Do you consider that you have sensitive or delicate skin?
· Do you bruise easily?
If you answer yes to one or both of the above questions then a test of the adhesion can be made by applying a strip to your inner forearm, just before the elbow. The strip should be left in place for at least 10 minutes before being removed. If there is any pigmentation or redness exhibited then a small amount of E45 moisturising cream should be applied directly to the skin immediately before application of the adhesive strips. The exact amount of cream required is dependent upon the need to reduce the adhesion. In ALL cases the white cream should NOT be visible on the skin when the strips is applied to the skin. If cream is visible then the light will not be able to reach the skin and perform an effective treatment.
In order to access the settings mode at any time, press and hold the select key (middle key with a tick) for 10 seconds whilst the device is switched off.
There is one recommended method for reducing the adhesion of the strips.
A small amount of moisturising cream such as E45 should be applied directly to the skin immediately before application of the adhesive strips. The exact amount of cream required is dependent upon the need to reduce the adhesion. In ALL cases the white cream should NOT be visible on the skin when the strip is applied to the skin. If cream is visible then the light will not be able to reach the skin and perform an effective treatment.
The only function on the device set to make a sound is the warning alarm, this will sound if one of the heads becomes detached or overheats. At the end of a treatment the heads will automatically turn off but the controller will remain on until it is manually turned off.
Lustre Pure Light Technology is a natural therapy and there are no known side effects. Regular use has been clinically proven to destroy P. acnes bacteria, the bacteria which cause spots.
Insert the charger and plug the device in. This will turn the device off automatically.
Many healthcare professionals now recommend that managing acne requires more than one treatment and recommend that managing the levels of sebum in the skin and reducing the bacteria levels in the skin which cause acne achieves the best results.
We always advise talking with your GP before using Lustre Pure Light if you are on any prescribed medication.
After each treatment session the Lustre adhesive strip should be removed and discarded. The Lustre therapy head should be cleaned using a moist cloth or cleansing wipe, a moist alcohol swab may also be used. Liquid of any description should not be allowed to enter the Lustre therapy heads or Lustre controller at any time. Do not use or attach Lustre Pure Light Technology to the main power supply if it has ever been exposed to liquid at any time as it is electrical equipment.
Do not use Lustre Pure Light if you have a history of; porphyria, solar urticaria, chronic actinic dermatitis, photosensitvity.
Do not use Lustre Pure Light over any suspicious or cancerous lesions.
Do not use Lustre Pure Light if you are taking amiodarone.
Do not use Lustre Pure Light if you are taking any photosensitising treatment.
Do not use Lustre Pure Light over or near a recent steroid injection.
Do not use Lustre Pure Light on children under 13 years old.
Lustre is NOT recommended for pregnant women. The safety of the treatment for pregnant women has NOT been tested and the risk is unknown
Yes the Lustre Pure Light Technology device is guaranteed to be free from defects for 12 months from the time of purchase.
Blue light therapy is the use of natural blue light from the visible light spectrum for a medical or therapeutic benefit. It has been used to treat acne for almost 40 years. Lustre Pure Light Technology has revolutionised the technology previously used, by leading dermatologists, to make it portable and wearable. Lustre Pure Light is the highly advanced 3rd Generation device for delivering blue-light therapy.
Online version coming soon!
Online version coming soon!
* Results may vary from person to person.